What's new in version 20.202211.0.0

Advanced Warehouse Management for Drink-IT  •  Release Note  •  7/6/2023  • 

Features

PBI No.Description
205575Archiving License Plate List
209753License Plates in picks - Take in to account destination
209858Bin List - Add field Status
214240Label Automation - Automatically Create Destination LPN and Print Destination label from within (OWM) Pick
221399Bin Content - Fields Fixed and Default not to be changed by processes
230557Production Consumption - Pick needs to be avoided
232303Block Deletion of the warehouse shipment with picked LPNs

Resolved issues

PBI No.Description
214746Label Automation - Print Label from Warehouse Receipt from Transfer Order
217538Warehouse Pick - Item with non-full LPN without Item Tracking - creates incorrect content lines
217741Transfer Order - Create Pick cannot cope with Picking Templates per Destination
217747Transfer Order - Incorrect LPN status after pick is registered
218600Printing obsolete LPNs on a Warehouse Receipt
222463Picking Template - Avoid inventory-corrupting quantities in picks
224359Qty Display Type Transport UoM only available for LP Type sorting Method
229490Hide returnable Vendor, Item and Order list from search result
230910Incorrect negative LPN quantities in Item Reclassification Journal

PBI 205575 - Archiving License Plate List

What

Archiving License Plate List.

Why

As a warehouse manager, I want to have only license plates in the license plate list which are in inventory, or may be recently shipped, so I have
a limited license plate list, when checking inventory.
As a warehouse manager, I want to have an archived license plate list, with older shipped license plates, so I will always be able to check out all
LPN's shipped.

How

Setup
Setup Adv. Warehouse Setup to guide you to the correct bin to consume from.
1. Choose the Search icon , enter Adv. Warehouse Setup and then choose the related link.
2. Fill in the fields in fastTab Archiving as necessary. Hover over a field to read a short description.

Automation runs on Job Queues on report 2034643


When License Plate Numbers are archived and used again, and archived again, they will have a new Version No.

Flow
Manual Archiving
1. Select the Search icon , enter License Plate List and then choose the related link.
2. Select action Archive. Hover over a field to read a short description.

Open License Plate Archive List

  1. Select the Search icon , enter License Plate Archive List and then choose the related link
  2. Hover over a field to read a short description.

PBI 209753 - License Plates in picks - Take in to account destination

What

License Plates in picks - Take in to account destination.

Why

As a Warehouse employee, I want to have the ship-to information immediately on my license plate when the license plate is created or picked for 1 destination, so I have the correct information on the License Plate to print, check and add other items.

How

Flow
1. Select the Search icon , enter Warehouse Picks and then choose the related link.
2. Select the pick, created by a Picking Template with as Picking Type Mix, you want to register.
3. To add a License Plate in the Place Line you can select license plates, instead of assigning a license plate. The available License plates to select from, will only be from the Warehouse Shipment related to the pick. And, when the Picking Templates field Create Pick by is equal to Destination, the
available License plates to select from, will only be from the Warehouse Shipment related to the pick and to the same destination.

PBI 209858 - Bin List - Add field Status

What

Bin List - Add field Status.

Why

As a Warehouse employee, I want to check on the status of a bin, when selecting the bin, so I can make sure to select the correct bin.

How

Additional fields are added on the Page Bin List. When selecting a bin and opening the Full list, you can add the additional fields using personalize.

PBI 214240 - Label Automation - Automatically Create Destination LPN and Print Destination label from within (OWM) Pick

What

Label Automation - Automatically Create Destination LPN and Print Destination label from within (OWM) Pick.

Why

As a Warehouse employee, I want to automatically print a content label when finishing the mixed pallet, so I can apply this label to the license plate and everybody (colleagues, customer, etc...) can immediately check the content of the license plate.

How

Setup in Business Central

To automate printing labels when finishing a pick, you have to setup a label, a Print Set, Label automation Print Events and add setup to the Picking Template.

Label Setup
1. Select the Search icon , enter Advanced Warehouse Mgmt. Connector Setup and then choose the related link.
2. Select the Actions action, Label Automation, Setup, Label Setup.
3. Select the New action.
4. Fill in the fields as necessary. Hover over a field to read a short description.

Print Set and Label automation Print Events
1. Select the Search icon , enter Print Sets and then choose the related link.
2. Select the New action.
3. Fill in the fields as necessary. Hover over a field to read a short description.
4. Choose the Open Record action in the No. Print Events field.
5. On the Label Automation Print Events page, choose the New action.
6. Fill in the fields as necessary. Hover over a field to read a short description.
7. Create more lines as necessary.

Modules
1. Select the Search icon , enter Picking Templates and then choose the related link.
2. Fill in the fields Print Set Code and Execute Print Set as necessary. Hover over a field to read a short description.

Functionality in Business Central
When registering the last line on a Warehouse pick, and no lines remain, the automation will according to the Picking Template setup create a Job Queue entry to print the print events of the Print Set.

PBI 221399 - Bin Content - Fields Fixed and Default not to be changed by processes

What

Bin Content - Fields Fixed and Default not to be changed by processes.

Why

As a Warehouse manager, I want the Create Pick to create the picks on the expected bins, so that the picks are with the bins I expected, according to
the Picking Template.

When creating a pick, the bin contents with an enabled Fixed field are selected first as bins in the pick.
When creating a pick using the Picking Template, this natural behavior is kept.

AWM users which want to keep the picking order equal to the picking order of the Picking Template, need to disable Fixed fields in the bin content.
In Standard Business the fields fixed and Default are often changed by standard processes, what means that the create pick functionality puts not
expected bins (fixed) in the picks.

How
Setup
1. Select the Search icon , enter Locations and then choose the related link.
2. Enable Auto Fixed and Default Bins. Hover over a fiels to read a short description.

PBI 230557 - Production Consumption - Pick needs to be avoided

What

Production Consumption - Pick needs to be avoided.

Why

As a Production employee, I need to be able to consume items without picking, even when the items are in a pick mandatory location, so I can consume those items without the restrain of the pick.

How
Setup
1. Select the Search icon , enter Locations and then choose the related link.
2. Select the location for which you want to add the functionality.
3. Enable Allow Prod. Cons. Without Pick, in the fastTab Advanced Warehouse Management.

Flow
Register Consumption and Output


The field Consumption Quantity in the Production Journal, where the Location Code has the Boolean Require Pick enabled, will only show the picked quantity minus the consumed quantity. However, by enabling the Allow Prod. Cons. Without Pick Boolean, the field Consumption Quantity in the Production Journal, where the Location Code has the Boolean Require Pick enabled, will show the quantity to consume minus the consumed quantity.

PBI 232303 - Block Deletion of the warehouse shipment with picked LPNs

What

Block Deletion of the warehouse shipment with picked LPNs.

Why

As a Warehouse Manager, I want it to be impossible to delete warehouse shipment for which we already picked license plates, so I do not have to clean up the incorrect Item and License Plate tracking created on the source document.

How
Setup
1. Select the Search icon , enter Logistics Statuses and then choose the related link.
2. Enable Block Warehouse Shipment Deletion, for all License Plate Statuses you want to protect the warehouse shipment from being deleted.

PBI 214746 - Label Automation - Print Label from Warehouse Receipt from Transfer Order

What

Label Automation - Print Label from Warehouse Receipt from Transfer Order.

Why

When using the Send To Label automation action in a Warehouse Receipt, created from a Transfer Order, no labels are send to the Label Automation, not in Report 2035241, nor 2034700. This issue is fixed.

PBI 217538 - Warehouse Pick - Item with non-full LPN without Item Tracking - creates incorrect content lines

What

Warehouse Pick - Item with non-full LPN without Item Tracking - creates incorrect content lines.

Why

When items with a License Plate tracking Code, not suited for the whole flow, are used in processes, not covered by the License Plate Tracking Rules, Detailed Warehouse Entries are not always created. This, bad setup, we cannot avoid. One of the results is that the License Plate Content lines could be
incorrect.


When in a process the combined rules on a movement, of Item and Customer or Item and Vendor, do not cover the inbound and outbound process of this
movement, the Detailed Warehouse entries for the missing rule will not be created, what means an inconsistency in the License Plate Content lines will
appear.

How
It is not possible to get the License Plate Content lines always correct.
Following corrections are put in place on calculating the License Plate Contents:

  • When in a location-bin, an Item-Lot Combination has no inventory anymore, only License Plate Content lines on shipment bins will be shown.
  • When the License Plate is shipped, only License Plate Content lines on the bin on the last Detailed Warehouse Entry, are shown.

PBI 217741 - Transfer Order - Create Pick cannot cope with Picking Templates per Destination

What

Transfer Order - Create Pick cannot cope with Picking Templates per Destination.

Why

When using a picking Template with Picking Per Destination, no full pallet pick was created. This issue is fixed.

PBI 217747 - Transfer Order - Incorrect LPN status after pick is registered

What

Transfer Order - Incorrect LPN status after pick is registered

Why

When picking License Plates for a Transfer Order, the license plate status was not updated. This issue is fixed.

PBI 218600 - Printing obsolete LPNs on a Warehouse Receipt

What

Printing obsolete LPNs on a Warehouse Receipt

Why

As a Warehouse employee, I want to have an error message when trying to assign License Plates to a lot tracked item, without lot tracking assigned, so I am immediately aware of my error, before printing labels or trying to post. This is fixed, the error message is added.

PBI 222463 - Picking Template - Avoid inventory-corrupting quantities in picks

What

Picking Template - Avoid inventory-corrupting quantities in picks.

Why

As a Salesperson, I want to enter sales lines and use other units of measure than the base unit of measure, so I can easily match the customer’s
demand. When the quantities to pick are calculated in a non-directed location with to less available quantity and the sales unit of measure is different than the base unit of measure, the quantity on the pick could be equal to an incomplete decimal number on the warehouse shipment. When fully picked and shipped, we will get a remaining inventory, which can no longer be fully shipped.

E.g.
A customer orders 4 Boxes (of 3 packs), where packs is the Base Unit of Measure.
We have 10 packs in our inventory.
Creating the pick will generate a pick for 10 packs.
Registering these 10 packs will add a registered quantity of 3,33333 boxes in the warehouse shipment.
After getting new inventory, we create a new pick for the remaining quantity, which is 2 packs.
Registering these 2 packs will add a registered quantity of 6,66666 boxes in the warehouse shipment.
Which gives us a remaining quantity to pick of 0,00001 boxes, never to be able to ship…


Do not use smaller Units of Measure than the Item Base Unit of Measure in any process in Business Central. If used, they can cause unexpected inventory
quantities, which can only be solved by manual intervention.

Our Solution
When the unit of measure used in an order is different than the base unit of measure on the sales order and hereby on the warehouse shipment, we are able to create picks rounded to the unit of measure used in the source document.

How
Setup
1. Select the Search icon , enter Picking Templates and then choose the related link.
2. Select the Picking Template Line, choose the correct option for the Pick Rounding field. Hover over a field to read a short description.

PBI 224359 - Qty Display Type Transport UoM only available for LP Type sorting Method

What

Qty Display Type Transport UoM only available for LP Type sorting Method

Why

Only when using the LP Type sorting Method we are allowed to use the Qty Display Type Transport UoM. The not yet developed option FEFO – License Plate Type in the Sorting Method is removed. This issue is fixed.

PBI 229490 - Hide returnable Vendor, Item and Order list from search result

What
Hide returnable Vendor, Item and Order list from search result.

Why

When typing in the search box the results should not show the returnable item, verndor and order list. This issue is fixed.

PBI 230910 - Incorrect negative LPN quantities in Item Reclassification Journal

What

Incorrect negative LPN quantities in Item Reclassification Journal

Why

When using the action Select Plate Numbers to add the License Plate Numbers in the License Plate Reservation Entries, the quantities of the license plates could be negative, which was incorrect. This issue is fixed.

Additionally fixed in this PBI:

  • Item Journal: License Plate tracking action added to Process Action Group
  • Item Reclassification: License Plate tracking action added to Process Action Line
  • Exp. Date on License Plate Content Line will be taken from the last Det. Warehouse Entries for this item and Lot No.