Setting up label printing

Article07/18/20242 min read

When using License Plate Numbers, mixed pallets, etc…, it could be nice to label those License Plates on the floor with the correct information.

To achieve this, we are working with a general setup to determine the communication to the webservice of the label software.

Note

It is imperative that all wanted labels are prepared and ready to be used by your label software. The label software automation of your label software needs to be installed and running to receive and process the JSON messages send out from the Advanced Warehouse Management Connector.

  1. Select the Search icon , enter Advanced Warehouse Mgmt. Connector Setup and then choose the related link.
  2. Choose the Insert Default Values action.
  3. Check and change the fields, as necessary. Hover over a field to read a short description.

To setup printers to be used in label printing software.

  1. Select the Search icon , enter Advanced Warehouse Mgmt. Connector Setup and then choose the related link.
  2. Choose the Printer Setup action.
  3. On the Label automation Printer Setup page, choose the Add Default Printers action, to add the default printers.
  4. On the Label automation Printer Setup page, choose the New action.
  5. Enter a Printer Name and a Description in the lines for each Printer. Be aware the Printer Name is the correct Printer Name used in the label printing software.

To setup labels to be printed in label printing software.

  1. Select the Search icon , enter Advanced Warehouse Mgmt. Connector Setup and then choose the related link.
  2. Choose the Labels Setup action.
  3. On the Label automation Label Setup page, choose the New action.
  4. Enter a Code and a Description in the lines for each Printer. Be aware when using the Report Output Type Send to Automation, these names are specific linked to the Report ID used. The standard labels to use on different documents can be found in the CRONUS DIT DEMO Company.
  5. Fill in the other fields as necessary. Hover over a field to read a short description. To setup the ability to print labels from the WMS App we use the Request Forms.

See also

Walkthrough: License Plate Info, reprint a License Plate No.