What's new in version 20.202303.0.0

Advanced Online Warehouse Management for Drink-IT  •  Release Note  •  1/10/2024  •  86 min

Features

PBI No. Description
238770 Ad Hoc Bin Replenishment - Disable Restrictions on Min and Max Quantities for Single Item (Dynamic) bins.
236393 Print labels directly from scanner when receiving.
241385 Direct Put Away with print functions.
240859 Stock Count - Newly scanned Lot Nos are not visible in the scanned list.
242109 Ad-Hoc Bin Replenishment - Addition about Priority on bin with content on same item.
242557 New functionality - Allow Pick List to be filtered based on Route No.
239292 Combine Receipt and Put-Away.
240639 Direct Put Away with print functions.
241969 Direct Put Away with print functions.

Resolved issues

PBI No. Description
239691 Returnable Items - OWM Activities need to finish with status posted.
238822 Modules Settings - Warehouse Pick - Default Validations.
237656 Ad-Hoc Bin Replenishment
238743 Bin Code on Submodule Template should be leading over personal bin for movement.
236708 No License Plate Type in the Detailed Warehouse Entries nor on the License Plate when posting a receipt from the OWM Activities (DK2913).
236374 Include Dock & Route & Date in Shipment Loading List.
241506 Pick - Not possible to pick Full Pallets scanning LPN.
240722 Ad hoc Movement - Error Message when multiple LPN on MoveBin and using LPN to place to destination bin.
241569 Correct the default Warehouse Receipt Validations.
241595 Mix Pallet - Upon creation the Quantity Inbound Restriction should be Not Enabled.
240255 Ad Hoc Replenishment - Item Description
242047 Returnable Items need to be updated when loaded multiple times.
242262 Entering 0 when handling damaged or lost goods does not work.

PBI 238770 - AOW - Ad Hoc Bin Replenishment - Disable Restrictions on Min and Max Quantities for Single Item (Dynamic) bins

What

AOW - Ad Hoc Bin Replenishment - Disable Restrictions on Min and Max Quantities for Single Item (Dynamic) bins.

Why

As a warehouse manager, I want to be able to use the Single Item (Dynamic) bins without restrictions for minimum and maximum quantities, so bin capacities can be setup to the reality.

How

Setup Bin Capacities

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to add the functionality on the scanning device.
  3. Select the Bins action in the Ribbon. The Bins list opens.
  4. Select the Capacity action in the Ribbon. The Bin Capacity list opens.
  5. Fill in all fields as necessary. Hover over a field to read a short description.

PBI 236393 - AOW - Print labels directly from scanner when receiving

What

AOW - Print labels directly from scanner when receiving.

Why

As a warehouse employee, I want to be able to print the labels for all incoming items from the scanner, so I can immediately apply those labels on the correct items before putting them away, without having to use Business Central.

Flow

Within the Direct Put-Away, we can add the label printing functionality.

1. Flow, in a company where for all items to receive new labels are printed, before being put-away.

Situation
a. The items arrive.
b. The items are sorted to 1 item and 1 Expiration Date per pallet.
c. We only know the Expiration Date on the items.
d. We want to put the items away in bulk.

Steps in the process on the scanner
e. Open the Direct Put-Away Module.
1 Select the receipt.
2 Enter the total quantity for 1 item 1 Expiration date. 3 Enter the Expiration date.
4 Scan the put-away bin.
5 The labels are printed, according to setup.
6 Apply the labels on the pallets.
7 Put away the pallets to the already scanned bin.

How

Setup in Business Central
Setup the module to print.

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Select Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Select Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Select the module Direct Put-Away. The modules card opens.
  6. Select the correct option in the Default Print Set field. Hover over a field to read a short description.

Setup on item to print other print set as module.

  1. Select the Search icon , enter Items and then choose the related link. The Item list opens.
  2. Select the Code for which you want to use another print set. The Item Card opens.
  3. In the FastTab Advanced Online Warehouse Management, select the correct option in the Print Set field. Hover over a field to read a short description.
  4. Close all pages.

Setting Up Label Printing

PBI 241385 - Direct Put Away with print functions

What

Direct Put Away with print functions.

Why

As a warehouse employee, I want to be able to process the Warehouse Receipt and the Warehouse Put-Away in one module on the scanner, including the possibilities to generate Lot Nos and License Plate Nos, so the warehouse employee can process any existing receipt immediately on the scanner, without having to use Business Central.

As a warehouse employee, I want to be able to print the labels for all incoming items from the scanner, so I can immediately apply those labels on the correct items before putting them away, without having to use Business Central.

Additional Functionalities

  • Default Print Set on Module.
  • You can only complete a Direct Put-Away when all taken items for this Direct Put-Away are placed.
  • In the Place Action, an option for guidance to the preferred bin, is added.
    • When no preferred bin, the put-away bin will be empty in the item line on the scanner in place modus.
    • The Preferred bin is visible and editable in the Item Bin Contents Page.
  • In the Place Action, you are not able to place incorrect items on a bin with Item Exclusivity.
  • In the Place Action, you are now able to place multiple items and LPNs on different bins.

Flow

Supported flows within the Direct Put-Away.

  • Creating a pick of an item, not in Available Qty. to Take inventory, even already scanned in the Direct Put-Away, is not possible until the Direct Put-Away is completed.
  • Posting of a shipment of an item-lot combination, not in inventory, even already scanned in the Direct Put-Away, is not possible until the Direct Put-Away is completed.

Flow per Item-Lot combination, in a company where for all items to receive:

  • No tracking info on label
  • New labels are printed per Item-Lot combination.
  • The items are put-away to 1 bin per Item-Lot combination.
    Situation 1 The items arrive. 2 The items are sorted to 1 item and 1 Expiration Date per pallet. 3 We only know the Expiration Date on the items. 4 We want to put the items away in bulk.

Steps in the process on the scanner

  1. Open the Direct Put-Away Module.
  2. Select the Receipt, you will be in the Take Modus.
    • Enter the total quantity for 1 item 1 Expiration date.
    • Enter the Expiration date.
  3. You will change to the Place Modus.
    • Scan the put-away bin.
    • The labels are printed, according to setup.
    • Apply the labels on the pallets.
    • Put away the pallets to the already scanned bin.
  4. You will change to the Take Modus.
  5. Process next Item-Lot Combination.
  6. When all items are processed, complete the Direct Put-Away.

Flow Item-Lot-License Plate No. combination, in a company where for all items to receive:

  • No tracking info on label.
  • New labels are printed per Item-Lot-License Plate No. combination.
  • The items are put-away to 1 bin per Item-Lot-License Plate No. combination.
    Situation
    • The items arrive.
    • The items are sorted to 1 item and 1 Expiration Date per pallet.
    • We only know the Expiration Date on the items.
    • We want to put the items away per pallet or group of pallets (when no License Plate is used).

Steps in the process on the scanner

  1. Open the Direct Put-Away Module.
  2. Select the Receipt, you will be in the Take Modus.
    • Enter the total quantity for 1 item 1 Expiration date.
    • Enter the Expiration date.
    • According to setup, you will stay in the take Modus or change to the Place Modus. When you stay in the take modus, you are able to enter totals for the items, per item- Expiration Date combination, until you longpress the Take Modus.
  3. In the Place Modus
    • Longpress the item line or scan the LPN.
    • Scan the put-away bin.
    • The labels are printed, according to setup.
    • Apply the labels on the pallets.
    • Put away the pallets to the already scanned bin.
    • According to setup, you will stay in the Place Modus or change to the Take Modus.
      When you stay in the Place modus, you are able put away all pallets by longpressing the lines and scanning the Put-Away bins, until you longpress the Place Modus.
  4. Process next Item-Lot Combination.
  5. When all items are processed, complete the Direct Put-Away.

How

Setup in Business Central Add the module to the OWM 6 App

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Select Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. In the FastTab On Completion, post.., select the Post Direct Put-Away field. Hover over a field to read a short description.
    Options:
  • Empty: No automatic posting of warehouse receipt
  • Post Warehouse Receipt (Always): Post the warehouse receipt every time we complete the Direct Put-Away document.
  • Post Warehouse Receipt (When completely handled): Post the warehouse receipt when we complete the Direct Put-Away document and all items and quantities are received.
  1. Select Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  2. Add a new Module on the scanner:
  • Module: Direct Put-Away
  • Sort Order: Integer
  • Default Quantity: 0
  • Posting Handler: Register Direct Put Away
  • Confirm License Plate Type: To your preference.
  • Default Print Set: This print set will be used, when no print set is added on the item.
    Close and open the Module to enable the Features and Request Forms fastTabs to become visible.
  • Display Module: Direct Put-Away
  1. Select the Create Default Validations action.
  2. Select the Validations action. The Module Validation list opens.
  3. Activate or deactivate validators, according to your setup.
  4. Select the Postback fields action. The Additional fields page opens.
  5. Fill in lines:
Field No. Field Name Confirmed Field No. Document Line Field No. Request Job Field No. GS1 Application Identifier
8 SSCC 2035250
9 Qty
2035240 LPType 2035241 2035246 2035246
2035242 Required Quantity 16
2035244 LastStep
2035248 DocumentLineNo 2035248
2035249 ExpirationDateText 2035249 2035249 15
2035251 ReUseLPN

12. Close
13. Select the Sub Module Templates action. This opens the Sub Module Templates list.
14. Click New, for each OWM User, using the Ad Hoc Movement, fill in the fields:

  • OWM User No.: OWMUser
  • No.: Unique No. (e.g: OWMUser_DPA), if not entered a code will be calculated.
  • Description: Direct Put-Away
  • Mode: Alternating Take\Place or Take
  • Bin Code: Create a Personal Put Away Bin for this User
  • Suggest Bin: Preferred Bin, or empty if you want no guidance

15. Close all pages.

Setup to Generate a Lot No from the Expiration Date Setup Item Tracking Codes

  1. Select the Search icon , enter Item Tracking Codes and then choose the related link.
    The Item tracking Codes list opens.
  2. Select the Code for which you want to add the generation of Lot Nos. from the Expiration Date and choose the Edit action.
    The Item Tracking Code Card page opens.
  3. On the Advanced Online Warehouse Management FastTab, fill in Direct Put-Away fields as necessary.
  4. Close all pages.

Setup Module on scanner

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Select Configure OWM on the action bar.
    The OWM Configuration page opens.
  4. Select Modules on Scanner on the action bar.
    The Modules on scanner list page opens.
  5. Select the module Direct Put-Away.
    The modules card opens.
  6. Select the Validations action.
    The Module Validation list page opens.
    To generate Lot Nos. from Expiration Date, activate:
    • The Validator Expiration Date
    • The Resolver GS1 YYMMDD to Date
    • The Resolver Auto Generate Lot No.
      The Lot Nos. generation standardly generates Lot No. for the total quantity for one Expiration Date (E.g.: qty 150 for LPN UoM of 40 gives 3 LPN’s with Qty 40 and 1 LPN with Qty 30). To only generate the LPNs for the full LPNs and separately generate the labels for the not full LPNs, activate:
    • The Validator Round Qty. Per Transport UOM
  7. Close all pages.

Setup to Generate a License Plate No.

  1. Select the Search icon , enter Items and then choose the related link.
  2. Select the Code for which you want to add the generation of License Plate Nos. in the Direct Put Away. The Item Card opens.
  3. In the fastTab Advanced Online Warehouse Management, fill in Direct Put-Away fields as necessary. Hover over a field to read a short description.
  4. Close all pages.

Setup on Module to print in place actions after scanning the place bin.

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Select Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Select Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Select the Default Print Set field. This print set will be used when no print set is added on the item.

Setup on item to print in place actions after scanning the place bin.

  1. Select the Search icon , enter Items and then choose the related link.
  2. Select the Code for which you want to use another print set. The Item Card opens.
  3. In the fastTab Advanced Online Warehouse Management, select the correct option in the Print Set field. Hover over a field to read a short description.
  4. Close all pages.

Setting Up Label Printing

PBI 240859 - AOW - Stock Count - Newly scanned Lot Nos are not visible in the scanned list

What

AOW - Stock Count - Newly scanned Lot Nos are not visible in the scanned list.

Why

As a Warehouse Manager, I want to be able to count inventory, not yet in our system, so I can add and correct the inventory in line with our real inventory.

For this it is necessary our warehouse employees do have the counted quantity on their scanner.

How

Additional to the bin content, shown on the stock count bin page, all the scanned items in this bin are added to the list.

PBI 240639 - AOW - Direct Put Away with print functions

What

AOW - Direct Put Away with print functions.

Why

As a warehouse employee, I want to be able to process the Warehouse Receipt and the Warehouse Put-Away in one module on the scanner, including the possibilities to generate Lot Nos and License Plate Nos, so the warehouse employee can process any existing receipt immediately on the scanner, without having to use Business Central.

As a warehouse employee, I want to be able to print the labels for all incoming items from the scanner, so I can immediately apply those labels on the correct items before putting them away, without having to use Business Central.

Additional Functionalities

  • Processing 2D Barcodes is now enabled.
  • Generate and scanning License Plate Nos has been improved by using the new validator Confirm License Plate No.
  • When using longpress on a line in the take modus, without entering a quantity before longpressing, the line quantity from the scanner to registrate is taken over in a quantity popup to confirm, when enabling the validator Validate the quantity. Be aware, the quantity may have been influenced by the validator Round Qty. Per Transport UOM.
  • When having multiple lines with the same item in the Warehouse Receipt, it is imperative to use longpress on the correct line in the Direct Put-Away, you are unable to scan information. For this we added instructions in the Direct Put-Away.
  • Deleting a Warehouse Receipt in Business Central, removes the OWM activity from the Activity List (OWM).
  • Processing any Unit of Measure in the Direct Put-Away is now enabled.
  • When an item has no Default Pallet Unit Of Measure in the Item Units of Measure, in the print functionality only 1 label with the total quantity will be printed.
  • To manually post a warehouse receipt, not completely processed in a Direct Put-Away, the action Update tracking from Direct Put-Away is added to the Warehouse Receipt card and list in Business Central.
  • Only Direct Put-Aways, with status released and In Progress, will be visible on the scanner.
  • A check on the LPN Quantity Inbound Restriction is added.
  • It is now possible to counter an incorrect registration with a negative registration, when the line is still visible on the Direct Put-Away.
  • It is not possible anymore to complete a Direct Put-Away, until you placed all items.

Flow

Within the Direct Put-Away.

Flow, in a company where for all items to receive new labels are printed, before being put-away.
Situation

  • The items arrive.
  • The items are sorted to 1 item and 1 Expiration Date per pallet.
  • We only know the Expiration Date on the items.
  • We want to put the items away in bulk.

Steps in the process on the scanner

  • e Open the Direct Put-Away Module.
    • Select the Receipt.
    • Enter the total quantity for 1 item 1 Expiration date.
    • Enter the Expiration date.
    • Scan the put-away bin.
    • The labels are printed, according to setup.
    • Apply the labels on the pallets.
    • Put away the pallets to the already scanned bin.


Posting of a shipment of an item-lot combination, not in inventory, even already scanned in the Direct Put Away, is not possible until the Direct Put-Away is completed.

How

Setup in Business Central Add the module to the OWM 6 App

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Select Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Select Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Add a new Module on the scanner:
  • Module: Direct Put-Away
  • Sort Order: Integer
  • Default Quantity: 0
  • Posting Handler: Register Direct Put Away
  • Confirm License Plate Type: To your preference.
    Close and open the Module to enable the Features and Request Forms fastTabs to become visible.
  • Display Module: Direct Put-Away
  1. Select the Create Default Validations action.
  2. Select the Validations action. The Module Validation list opens.
  3. Activate or deactivate validators, according to your setup.
  4. Select the Postback fields action. The Additional fields page opens.
  5. Fill in lines:
Field No. Field Name Confirmed Field No. Document Line Field No. Request Job Field No. GS1 Application Identifier
8 SSCC 2035250
9 Qty
2035240 LPType 2035241 2035246 2035246
2035242 Required Quantity 16
2035244 LastStep
2035248 DocumentLineNo 2035248
2035249 ExpirationDateText 2035249 2035249 15
2035251 ReUseLPN
  1. Close
  2. Select the Sub Module Templates action. This opens the Sub Module Templates list.
  3. Select the New Action, for each OWM User, using the Ad Hoc Movement, fill in the fields:
  • OWM User No.: OWMUser
  • No.: Unique No. (e.g: OWMUser_DPA)
  • Description: Direct Put-Away
  • Mode: Alternating Take\Place or Take
  • Bin Code: Create a Personal Put Away Bin for this User
  1. Close all pages.

Setup to Generate a Lot No from the Expiration Date Setup Item Tracking Codes

  1. Select the Search icon , enter Item Tracking Codes and then choose the related link. The Item tracking Codes list opens.
  2. Select the Code for which you want to add the generation of Lot Nos. from the Expiration Date and choose the Edit action. The Item Tracking Code Card opens.
  3. In the FastTab Advanced Online Warehouse Management, fill in Direct Put-Away fields as necessary. Hover over a field to read a short description.
  4. Close all pages.

Setup Module on scanner

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Select Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Select Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Select the module Direct Put-Away. The modules card opens.
  6. Select the Validations action. The Module Validation list opens.
    To generate Lot Nos. from Expiration Date, activate:
    • The Validator Expiration Date
    • The Resolver GS1 YYMMDD to Date
    • The Resolver Auto Generate Lot No.
      The Lot Nos. generation standardly generates Lot No. for the total quantity for one Expiration Date (E.g.: qty 150 for LPN UoM of 40 gives 3 LPN’s with Qty 40 and 1 LPN with Qty 30). To only generate the LPNs for the full LPNs and separately generate the labels for the not full LPNs, activate:
    • The Validator Round Qty. Per Transport UOM
  7. Close all pages.

Setup to Generate a License Plate No.

  1. Select the Search icon , enter Items and then choose the related link.
  2. Select the Code for which you want to add the generation of License Plate Nos. in the Direct Put Away. The Item Card opens.
  3. In the fastTab Advanced Online Warehouse Management, fill in Direct Put-Away fields as necessary. Hover over a field to read a short description.
  4. Close all pages.

Setup on item to print in place actions after scanning the place bin.

  1. Select the Search icon , enter Items and then choose the related link.
  2. Select the Code for which you want to use another print set. The Item Card opens.
  3. In the FastTab Advanced Online Warehouse Management, select the correct option in the Print Set field. Hover over a field to read a short description.
  4. Close all pages.

Setting Up Label Printing

PBI 242109 - AOW - Ad-Hoc Bin Replenishment - Addition about Priority on bin with content on same item

What

AOW - Ad-Hoc Bin Replenishment - Addition about Priority on bin with content on same item.

Why

As a Warehouse Manager, I want the Ad Hoc Bin Replenishment to first add items to a bin already containing this item, before replenishing other bins for the same Item, so we have bins with enough quantities and don't have a lot of bins filled with small quantities.

How

Setup in BC
Setup Priority in Picking Template.

  1. Select the Search icon , enter Picking Templates and then choose the related link.
  2. Enable the Set Prio On Existing Item Content field.

PBI 242557 - AOW - New functionality - Allow Pick List to be filtered based on Route No

What

AOW - New functionality - Allow Pick List to be filtered based on Route No.

Why

As a Warehouse Manager, I want the warehouse employees to be able to see information from Logistics on the pick header, so they can filter on this information and easily select the correct pick.

How

Setup in Business Central

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Select Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Select Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Select the Warehouse Pick Module. The Module Settings card opens.
  6. Select the Header Fields action. The Header Fields list opens.
  7. Fill in Lines according to the fields to display in the header. Hover over a field to read a short description.
    • When leaving the Text Format field Blank, the standard format is used to display according to the field type.
    • When adding a text format (Example: <Day,2>/<Month,2>) in the Text Format field, this format is used to display according to the field type. For more information about different formats: Formatting Values, Dates, and Time
  8. Close the Header fields list.
  9. Fill in the Document Header Format field, using the identifiers from the header field list. (Example: %2 - %1(%3))
  10. Select the Default User Filter action. The Default User Filter list opens.
  11. Fill in Lines per OWM User to default filter in the document list. Hover over a field to read a short description.
  12. Close the Default User Filter list.
  13. Fill in the Document Filter Format field, using the identifiers from the header field list. (Example: %2 - %1(%3))

  • When the Document Header Format field is empty, the standard header is displayed.
  • When the Document Filter Format field is empty, you are only able to filter on the first line of the document.
  • Best practice is to keep the Document Header Format identical to the Document Filter Format. If necessary, when you want to add extra fields to filter on, add those at the end of the string.

Flows on scanner, depending on setup in Default User Filter List
When

  • No Search String is entered and Default Locked is disabled
    • First time entering: Complete list
    • Enter filter: # appears for the 2nd header, because it is your last filter, the complete list is filtered on the last filter
    • Enter new filter: # appears for the 2nd header, because it is your last filter, the complete list is filtered on the last filter
    • Enter * as filter: # disappears, because you emptied your last filter, the complete list is visible
    • Reopening the list: will show you the # when you closed the list when using a filter, because it was your last filter
  • No Search String is entered and Default Locked is enabled
    • First time entering: Complete list, no prefix because the Locked Default Value is empty.
    • Enter filter: The complete list is filtered on filter on your screen.
    • Enter new filter: The complete list is filtered on filter on your screen.
    • Enter * as filter: Complete list
    • Reopening the list: Complete list
  • Search String is entered and Default Locked is disabled
    • First time entering: Filtered list on the Search String, * appears for the 2nd header
    • Enter filter: # appears for the 2nd header, because it is your last filter, the default filtered list is also filtered on the last filter
    • Enter new filter: # appears for the 2nd header, because it is your last filter, the default filtered list is also filtered on the last filter
    • Enter * as filter: Filtered list on the Search String, * appears for the 2nd header
    • Reopening the list: will show you the # when you closed the list when using a filter on the default filter, because it was your last filter, else a * appears for the 2nd header, because it is your default filter
  • Search String is entered and Default Locked is enabled
    • First time entering: Filtered list on the Search String, * appears for the 2nd header
    • Enter filter: * appears for the 2nd header, because the default is Locked, the default filtered list is also filtered on the last filter
    • Enter new filter: * appears for the 2nd header, because the default is Locked, the default filtered list is also filtered on the last filter
    • Enter * as filter: Filtered list on the Search String, * appears for the 2nd header
    • Reopening the list: Filtered list on the Search String, * appears for the 2nd header

PBI 239292 - AOW - Combine Receipt and Put-Away

What

AOW - Combine Receipt and Put-Away.

Why

As a warehouse employee, I want to be able to process the Warehouse Receipt and the Warehouse Put-Away in one module on the scanner, including the possibilities to generate Lot Nos and License Plate Nos, so the warehouse employee can process any existing receipt immediately on the scanner, without having to use Business Central.

Flow

Within the Direct Put-Away, multiple flows are possible, some examples of flows below.

Flow, in a company where for all items to receive new labels are printed, before being put-away.
Situation

  • The items arrive.
  • The items are sorted to 1 item and 1 Expiration Date per pallet.
  • We only know the Expiration Date on the items.
  • We want to put the items away in bulk.

Steps in the process on the scanner

  • e Open the Direct Put-Away Module.
    • Select the Receipt.
    • Enter the total quantity for 1 item 1 Expiration date.
    • Enter the Expiration date.
    • Scan the put-away bin.
    • Put away the pallets to the already scanned bin.


Posting of a shipment of an item-lot combination, not in inventory, even already scanned in the Direct Put Away, is not possible until the Direct Put-Away is completed.

How

Setup in Business Central Add the module to the OWM 6 App

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Select Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Select Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Add a new Module on the scanner:
  • Module: Direct Put-Away
  • Sort Order: Integer
  • Default Quantity: 0
  • Posting Handler: Register Direct Put Away
  • Confirm License Plate Type: To your preference.
    Close and open the Module to enable the Features and Request Forms fastTabs to become visible.
  • Display Module: Direct Put-Away
  1. Select the Create Default Validations action.
  2. Select the Validations action. The Module Validation list opens.
  3. Activate or deactivate validators, according to your setup.
  4. Select the Postback fields action. The Additional fields page opens.
  5. Fill in lines:
Field No. Field Name Confirmed Field No. Document Line Field No. Request Job Field No. GS1 Application Identifier
9 Qty
2035240 LPType 2035241 2035246 2035246
2035244 LastStep
2035248 DocumentLineNo 2035248
2035249 ExpirationDateText 2035249 2035249 15
  1. Close
  2. Choose the Sub Module Templates action. This opens the Sub Module Templates list.
  3. Choose the New Action, for each OWM User, using the Ad Hoc Movement, fill in the fields:
  • OWM User No.: OWMUser
  • No.: Unique No. (e.g: OWMUser_DPA)
  • Description: Direct Put-Away
  • Mode: Alternating Take\Place or Take
  • Bin Code: Create a Personal Put Away Bin for this User
  1. Close all pages.

Setup to Generate a Lot No from the Expiration Date Setup Item Tracking Codes

  1. Select the Search icon , enter Item Tracking Codes and then choose the related link. The Item tracking Codes list opens.
  2. Select the Code for which you want to add the generation of Lot Nos. from the Expiration Date and choose the Edit action. The Item Tracking Code Card opens.
  3. In the fastTab Advanced Online Warehouse Management, fill in Direct Put-Away fields as necessary. Hover over a field to read a short description.
  4. Close all pages.

Setup Module on scanner

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Select Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Select Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Select the module Direct Put-Away. The modules card opens.
  6. Select the Validations action. The Module Validation list opens.
    To generate Lot Nos. from Expiration Date, activate:
    • The Validator Expiration Date
    • The Resolver GS1 YYMMDD to Date
    • The Resolver Auto Generate Lot No.
      The Lot Nos. generation standardly generates Lot No. for the total quantity for one Expiration Date (E.g.: qty 150 for LPN UoM of 40 gives 3 LPN’s with Qty 40 and 1 LPN with Qty 30). To only generate the LPNs for the full LPNs and separately generate the labels for the not full LPNs, activate:
    • The Validator Round Qty. Per Transport UOM
  7. Close all pages.

Setup to Generate a License Plate No.

  1. Select the Search icon , enter Items and then choose the related link.
  2. Select the Code for which you want to add the generation of License Plate Nos. in the Direct Put Away. The Item Card opens.
  3. In the fastTab Advanced Online Warehouse Management, fill in Direct Put-Away fields as necessary. Hover over a field to read a short description.
  4. Close all pages.

PBI 240639 - AOW - Direct Put Away with print functions

What

AOW - Direct Put Away with print functions.

Why

As a warehouse employee, I want to be able to process the Warehouse Receipt and the Warehouse Put-Away in one module on the scanner, including the possibilities to generate Lot Nos and License Plate Nos, so the warehouse employee can process any existing receipt immediately on the scanner, without having to use Business Central.

As a warehouse employee, I want to be able to print the labels for all incoming items from the scanner, so I can immediately apply those labels on the correct items before putting them away, without having to use Business Central.

Additional Functionalities

  • Processing 2D Barcodes is now enabled.
  • Generate and scanning License Plate Nos has been improved by using the new validator Confirm License Plate No.
  • When using longpress on a line in the take modus, without entering a quantity before longpressing, the line quantity from the scanner to registrate is taken over in a quantity popup to confirm, when enabling the validator Validate the quantity. Be aware, the quantity may have been influenced by the validator Round Qty. Per Transport UOM.
  • When having multiple lines with the same item in the Warehouse Receipt, it is imperative to use longpress on the correct line in the Direct Put-Away, you are unable to scan information. For this we added instructions in the Direct Put-Away.
  • Deleting a Warehouse Receipt in Business Central, removes the OWM activity from the Activity List (OWM).
  • Processing any Unit of Measure in the Direct Put-Away is now enabled.
  • When an item has no Default Pallet Unit Of Measure in the Item Units of Measure, in the print functionality only 1 label with the total quantity will be printed.
  • To manually post a warehouse receipt, not completely processed in a Direct Put-Away, the action Update tracking from Direct Put-Away is added to the Warehouse Receipt card and list in Business Central.
  • Only Direct Put-Aways, with status released and In Progress, will be visible on the scanner.
  • A check on the LPN Quantity Inbound Restriction is added.
  • It is now possible to counter an incorrect registration with a negative registration, when the line is still visible on the Direct Put-Away.
  • It is not possible anymore to complete a Direct Put-Away, until you placed all items.

Flow

Within the Direct Put-Away.

Flow, in a company where for all items to receive new labels are printed, before being put-away.
Situation

  • The items arrive.
  • The items are sorted to 1 item and 1 Expiration Date per pallet.
  • We only know the Expiration Date on the items.
  • We want to put the items away in bulk.

Steps in the process on the scanner

  • e Open the Direct Put-Away Module.
    • Select the Receipt.
    • Enter the total quantity for 1 item 1 Expiration date.
    • Enter the Expiration date.
    • Scan the put-away bin.
    • The labels are printed, according to setup.
    • Apply the labels on the pallets.
    • Put away the pallets to the already scanned bin.


Posting of a shipment of an item-lot combination, not in inventory, even already scanned in the Direct Put Away, is not possible until the Direct Put-Away is completed.

How

Setup in Business Central Add the module to the OWM 6 App

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Select Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Select Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Add a new Module on the scanner:
  • Module: Direct Put-Away
  • Sort Order: Integer
  • Default Quantity: 0
  • Posting Handler: Register Direct Put Away
  • Confirm License Plate Type: To your preference.
    Close and open the Module to enable the Features and Request Forms fastTabs to become visible.
  • Display Module: Direct Put-Away
  1. Select the Create Default Validations action.
  2. Select the Validations action. The Module Validation list opens.
  3. Activate or deactivate validators, according to your setup.
  4. Select the Postback fields action. The Additional fields page opens.
  5. Fill in lines:
Field No. Field Name Confirmed Field No. Document Line Field No. Request Job Field No. GS1 Application Identifier
8 SSCC 2035250
9 Qty
2035240 LPType 2035241 2035246 2035246
2035242 Required Quantity 16
2035244 LastStep
2035248 DocumentLineNo 2035248
2035249 ExpirationDateText 2035249 2035249 15
2035251 ReUseLPN
  1. Close
  2. Choose the Sub Module Templates action. This opens the Sub Module Templates list.
  3. Choose the New Action, for each OWM User, using the Ad Hoc Movement, fill in the fields:
  • OWM User No.: OWMUser
  • No.: Unique No. (e.g: OWMUser_DPA)
  • Description: Direct Put-Away
  • Mode: Alternating Take\Place or Take
  • Bin Code: Create a Personal Put Away Bin for this User
  1. Close all pages.

Setup to Generate a Lot No from the Expiration Date Setup Item Tracking Codes

  1. Select the Search icon , enter Item Tracking Codes and then choose the related link. The Item tracking Codes list opens.
  2. Select the Code for which you want to add the generation of Lot Nos. from the Expiration Date and choose the Edit action. The Item Tracking Code Card opens.
  3. In the fastTab Advanced Online Warehouse Management, fill in Direct Put-Away fields as necessary. Hover over a field to read a short description.
  4. Close all pages.

Setup Module on scanner

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Choose Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Choose Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Select the module Direct Put-Away. The modules card opens.
  6. Choose the Validations action. The Module Validation list opens.
    To generate Lot Nos. from Expiration Date, activate:
    • The Validator Expiration Date
    • The Resolver GS1 YYMMDD to Date
    • The Resolver Auto Generate Lot No.
      The Lot Nos. generation standardly generates Lot No. for the total quantity for one Expiration Date (E.g.: qty 150 for LPN UoM of 40 gives 3 LPN’s with Qty 40 and 1 LPN with Qty 30). To only generate the LPNs for the full LPNs and separately generate the labels for the not full LPNs, activate:
    • 4The Validator Round Qty. Per Transport UOM
  7. Close all pages.

Setup to Generate a License Plate No.

  1. Select the Search icon , enter Items and then choose the related link.
  2. Select the Code for which you want to add the generation of License Plate Nos. in the Direct Put Away. The Item Card opens.
  3. In the FastTab Advanced Online Warehouse Management, fill in Direct Put-Away fields as necessary. Hover over a field to read a short description.
  4. Close all pages.

Setup on item to print in place actions after scanning the place bin.

  1. Select the Search icon , enter Items and then choose the related link.
  2. Select the Code for which you want to use another print set. The Item Card opens.
  3. In the FastTab Advanced Online Warehouse Management, select the correct option in the Print Set field. Hover over a field to read a short description.
  4. Close all pages.

Setting Up Label Printing

PBI 241969 - AOW - Direct Put Away with print functions

What

AOW - Direct Put Away with print functions.

Why

As a warehouse employee, I want to be able to process the Warehouse Receipt and the Warehouse Put-Away in one module on the scanner, including the possibilities to generate Lot Nos and License Plate Nos, so the warehouse employee can process any existing receipt immediately on the scanner, without having to use Business Central.

As a warehouse employee, I want to be able to print the labels for all incoming items from the scanner, so I can immediately apply those labels on the correct items before putting them away, without having to use Business Central.

Additional Functionalities

  • Sales Return Order Header is visible in OWM6 document list
  • Template Steering to place items in warehouse
    • Current Template Flow to propose a bin to place
      • Capacity and keep Item together
      • Capacity
      • Preferred Bin
  • When scanning the receipt bin in the place action, an error message is issued.
  • No number of documents is shown in the main menu.
  • Request Form enabled on Place lines to manually print labels if necessary.
  • When in the preferred flow, the take action will also show the preferred bin.

Flow & options

Supported flows are based on the Suggest Bin. The options are the flavors within these flows.

  • Creating a pick of an item, not in Available Qty. to Take inventory, even already scanned in the Direct Put-Away, is not possible until the Direct Put-Away is completed.
  • Posting of a shipment of an item-lot combination, not in inventory, even already scanned in the Direct Put-Away, is not possible until the Direct Put-Away is completed.
  1. Flow **Preferred bin
    This is a flow in which we will take into account the preferred bin in the place modus. Possible methods in the take modus:
  • From scan the already existing label on the incoming pallet.
  • To generate a Lot No. from the Expiration date and generate LPN’s.
  • And all stages between…
  • The preferred bin is already shown in the take modus.

Possible methods in the place modus:

  • Lines will be created by uniqueness, meaning the quantities will be split on Item, Lot No., and License Plate No. The preferred bin will be shown.
  • Scanning first the bin will add all items in place modus on this bin.
  • Scanning a LPN or long press on a line will select the items to place, scanning the bin will only add the selected items to the scanned bin.
  • Depending on the place bin, a label can be printed upon scanning the bin.
  • Using a request form, you are able to manually print a label for the selected line.
  1. Flow According to Template
    This flow is taking into account a Replenishment Pick Template Group, to guide through the different bins to place the items. Possible methods in the take modus:
  • From scan the already existing label on the incoming pallet
  • To generate a Lot No. from the Expiration date and generate LPN’s
  • And all stages between…

Possible methods in the place modus:

  • Lines will be created by uniqueness, meaning the quantities will be split on Item, Lot No., License Plate No. and calculated bin. The bin will be calculated to through the flow
    • Capacity and keep Item together
    • Capacity
    • Preferred Bin
  • Scanning first the bin will add all items in place modus on this bin.
  • Scanning a LPN or long press on a line will select the items to place, scanning the bin will only add the selected items to the scanned bin.
  • Using a request form, you are able to manually print a label for the selected line.

Some flow Examples

  1. Flow per Item-Lot combination, in a company where for all items to receive:

    • No tracking info on label
    • New labels are printed per Item-Lot combination.
    • The items are put-away to 1 bin per Item-Lot combination.
      Situation
    • The items arrive.
    • The items are sorted to 1 item and 1 Expiration Date per pallet.
    • We only know the Expiration Date on the items.
    • We want to put the items away in bulk.
      Steps in the process on the scanner
    • Open the Direct Put-Away Module.
    • Select the Receipt, you will be in the Take Modus.
      • Enter the total quantity for 1 item 1 Expiration date.
      • Enter the Expiration date.
    • You will change to the Place Modus.
      • 1 Scan the put-away bin.
      • 2 The labels are printed, according to setup.
      • 3 Apply the labels on the pallets.
      • 4 Put away the pallets to the already scanned bin.
    • You will change to the Take Modus.
    • Process next Item-Lot Combination
    • When all items are processed, complete the Direct Put-Away

  2. Flow Item-Lot-License Plate No. combination, in a company where for all items to receive:

    • No tracking info on label
    • New labels are printed per Item-Lot-License Plate No. combination.
    • The items are put-away to 1 bin per Item-Lot-License Plate No combination.
      Situation
    • 1 The items arrive.
    • 2 The items are sorted to 1 item and 1 Expiration Date per pallet.
    • 3 We only know the Expiration Date on the items.
    • 4 We want to put the items away per pallet or group of pallets (when no License Plate is used).

Steps in the process on the scanner

  1. Open the Direct Put-Away Module.
  2. Select the Receipt, you will be in the Take Modus.
    • 1 Enter the total quantity for 1 item 1 Expiration date.
    • 2 Enter the Expiration date.
    • 3 According to setup, you will stay in the take Modus or change to the Place Modus. When you stay in the take modus, you are able to enter totals for the items, per item- Expiration Date combination, until you longpress the Take Modus.
  3. In the Place Modus
    • 1 Longpress the item line or scan the LPN.
    • 2 Scan the put-away bin.
    • 3 The labels are printed, according to setup.
    • 4 Apply the labels on the pallets.
    • 5 Put away the pallets to the already scanned bin.
    • 6 According to setup, you will stay in the Place Modus or change to the Take Modus. When you stay in the Place modus, you are able put away all pallets by longpressing the lines and scanning the Put-Away bins, until you longpress the Place Modus.
  4. Process next Item-Lot Combination
  5. When all items are processed, complete the Direct Put-Away

How

Setup in Business Central
Configure OWM and add the module to the OWM 6 App

  1. Select the Search icon , enter Locations and then choose the related link.

  2. Select the location for which you want to set the validations to the default validations.

  3. Choose Configure OWM in the Ribbon. The OWM Configuration page opens.

  4. In the fastTab On Completion, post.., select the Post Direct Put-Away field. Hover over a field to read a short description. Options:

    • Empty: No automatic posting of warehouse receipt
    • Post Warehouse Receipt (Always): Post the warehouse receipt every time we complete the Direct Put-Away document.
    • Post Warehouse Receipt (When completely handled): Post the warehouse receipt when we complete the Direct Put-Away document and all items and quantities are received.

  5. Choose Modules on Scanner in the Ribbon.
    The Modules on scanner list opens.

  6. Add a new Module on the scanner:

  • Module: Direct Put-Away
  • Sort Order: Integer
  • Default Quantity: 0
  • Posting Handler: Register Direct Put Away
  • Confirm License Plate Type: To your preference.
  • Default Print Set: This print set will be used, when no print set is added on the item. Close and open the Module to enable the Features and Request Forms fastTabs to become visible.
  • Display Module: Direct Put-Away
  1. Choose the Create Default Validations action.
  2. Choose the Validations action. The Module Validation list opens.
  3. Activate or deactivate validators, according to your setup.
  4. Choose the Postback fields action. The Additional fields page opens.
  5. Fill in lines:
Field No. Field Name Confirmed Field No. Document Line Field No. Request Job Field No. GS1 Application Identifier
8 SSCC 2035250
9 Qty
10 BinCode 2035252
2035240 LPType 2035241 2035246 2035246
2035242 Required Quantity 16
2035244 LastStep
2035248 DocumentLineNo 2035248
2035249 ExpirationDateText 2035249 2035249 15
2035251 ReUseLPN
  1. Close
  2. Choose the Sub Module Templates action. This opens the Sub Module Templates list.
  3. Choose the New Action, for each OWM User, using the Ad Hoc Movement, fill in the fields:
  • OWM User No.: OWMUser
  • No.: Unique No. (e.g: OWMUser_DPA) if not entered a code will be calculated.
  • Description: Direct Put-Away
  • Mode: Alternating Take\Place or Take
  • Bin Code: Create a Personal Put Away Bin for this User
  • Suggest Bin: Preferred Bin, According To Template or empty if you want no guidance
  • Replenishment Pick Template Group: The Pick template group for the Direct Put-Away

15. Close all pages.

Setup a Warehouse Template Group to use in the Template Flow
See: Setting Up Warehouse Template Groups

Setup a Warehouse Templates to use in the Template Flow

  1. Select the Search icon , enter Warehouse Templates and then choose the related link.
  2. On the Warehouse Templates page, choose the New action.
  3. Select the Warehouse Template Group.
  4. Enter a code and a description in the lines for each Warehouse template.
  5. No other fields needs to be filled. Hover over a field to read a short description.
  6. For each line, choose the Picking Order action, this is mandatory.
  7. On the Picking Group Order page, choose the New action.
  8. Enter a Warehouse Template Group, Warehouse Template Code, Sequence and Picking Bin Group Code in the lines for each Bin group code, you want to pick from. This will determine the Put-Away flow through your warehouse.
    See also: Setting Up Warehouse Templates

Setup Bin Capacities to use in the Template Flow

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to add the functionality on the scanning device
  3. Choose the Bins action in the Ribbon. The Bins list opens.
  4. Choose the Capacity action in the Ribbon. The Bin Capacity list opens.
  5. Fill in all fields as necessary. Hover over a field to read a short description.

  • One bin can be replenished with multiple items, the Maximum Level Quantity is the maximum quantity for the item in the bin group.
  • Think about the minimum quantity in the Bin capacity lines, because putting the minimum quantity to 0, means you will only put items in the bin when you have no inventory in the bin. Shocking, but after putting the first pallet in the bin, the quantity is higher than 0, so no more pallets are dispatched to the bin. To make sure every bin will be filled up to the last pallet, the minimum quantity should be the maximum quantity, except for single pallet bins.

Setup to Generate a Lot No from the Expiration Date Setup Item Tracking Codes
1. Select the Search icon , enter Item Tracking Codes and then choose the related link. The Item tracking Codes list opens.
2. Select the Code for which you want to add the generation of Lot Nos. from the Expiration Date and choose the Edit action. The Item Tracking Code Card opens.
3. In the FastTab Advanced Online Warehouse Management, fill in Direct Put-Away fields as necessary. Hover over a field to read a short description.
4. Close all pages.

Setup Module on scanner
5. Select the Search icon , enter Locations and then choose the related link.
6. Select the location for which you want to set the validations to the default validations.
7. Choose Configure OWM in the Ribbon. The OWM Configuration page opens.
8. Choose Modules on Scanner in the Ribbon. The Modules on scanner list opens.
9. Select the module Direct Put-Away. The modules card opens.
10. Choose the Validations action. The Module Validation list opens.
To generate Lot Nos. from Expiration Date, activate:

  • The Validator Expiration Date
  • The Resolver GS1 YYMMDD to Date
  • The Resolver Auto Generate Lot No.
    The Lot Nos. generation standardly generates Lot No. for the total quantity for one Expiration Date (E.g.: qty 150 for LPN UoM of 40 gives 3 LPN’s with Qty 40 and 1 LPN with Qty 30). To only generate the LPNs for the full LPNs and separately generate the labels for the not full LPNs, activate:
  • The Validator Round Qty. Per Transport UOM

11. Close all pages.

Setup to Generate a License Plate No.

  1. Select the Search icon , enter Items and then choose the related link.
  2. Select the Code for which you want to add the generation of License Plate Nos. in the Direct Put Away. The Item Card opens.
  3. In the FastTab Advanced Online Warehouse Management, fill in Direct Put-Away fields as necessary. Hover over a field to read a short description.
  4. Close all pages.

Setup on Module to print in place actions after scanning the place bin.

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations
  3. Choose Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Choose Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Choose the Default Print Set field. This print set will be used when no print set is added on the item.

Setup on item to print in place actions after scanning the place bin.

  1. Select the Search icon , enter Items and then choose the related link.
  2. Select the Code for which you want to use another print set. The Item Card opens.
  3. In the FastTab Advanced Online Warehouse Management, select the correct option in the Print Set field. Hover over a field to read a short description.
  4. Close all pages.

See also: Setting Up Label Printing

Setup on bin to print in place actions after scanning the place bin.

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations
  3. Choose the Bins action. The Bins list opens.
  4. Enable the Execute Print Direct Put Away field on the bins you want to setup to print labels in the place action. Hover over a field to read a short description.
    Setup on Module to manually print in place Modus.
    For this we need a request form
  5. Select the Search icon , enter Request Forms (OWM) and then choose the related link.
  6. Choose the New action.
  7. Fill in the fields as necessary. Hover over a field to read a short description.
    • Applies to: Line
    • Request Type: Print
    • Handle Immediately: Yes
    • Label Code: Your reprint Label Code
    • For Module: Direct Put-Away
  8. In the FastTab Fields, no request form input fields are determined.
    Example: Walkthrough: License Plate Info, reprint a License Plate No.

And add this request form to the module

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations
  3. Choose Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Choose Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Select the Direct Put-Away module. The module card opens.
  6. Open the FastTab Request Forms. The list opens.
    • ID: The request form created above
    • Handler: Send To Label Automation

PBI 239691 - Fix - AOW - Returnable Items - OWM Activities need to finish with status posted

What

Fix - AOW - Returnable Items - OWM Activities need to finish with status posted.

Why

When using a Job queue entry to run OWM Posting, multiple repeating Purchase order lines were created using The Returnable Items function. This issue is fixed.

PBI 238822 - Fix - AOW - Modules Settings - Warehouse Pick - Default Validations

What

Fix - AOW - Modules Settings - Warehouse Pick - Default Validations.

Why

As a Warehouse Employee, I want to have the correct standard validations on the Warehouse Pick after choosing the Create Default Validations action, so I can easily start my setup.

The standard setup of the warehouse pick

  • does include the Quick Pick confirmation.
  • doesn’t include the Quantity dialog (incl. the Reason Code)
  • nor the License Plate Type dialog

How

Setup

When we want to reset the validators for a Module, we use the Create Default Validations action.


Best practice is to take a copy or print screen of your current validator settings before moving on to the next steps.

You can renew the list of validators to the latest version by:

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Choose Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Choose Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Select the Module for which you want to set the validations to the default validations. The Module Settings page opens.
  6. Choose the Create Default Validations action.
  7. Choose the Validations action. The Module Validation list opens.
  8. Activate or deactivate validators, according to your setup.

PBI 237656 - Fix - AOW- Ad-Hoc Bin Replenishment

What

Fix - AOW- Ad-Hoc Bin Replenishment.

Why

Following issues occurred:

  • Replenishment on Scanner: Always 1 line to much, versus the setup
  • On the scanner after long-pressing the first LPN in the place action, thus moving it, we cannot see the Bin to place anymore for the remaining LPN.
  • On the scanner after placing a part LPN, we cannot see the Bin to place anymore for the remaining LPN.
  • When taken multiple LPNs, in the place all lines have the same bin to place.
  • When we want to take multiple LPNs, it is unclear which replenishment is covered with the LPN we took.
  • The Item Priorities in the Bin Capacity did not update correctly.
  • The Item Priorities in the Bin Capacity are sorted descending, which means all fields are sorted descending, resulting in an incorrect Replenishment list.

These issues are fixed.


To have the correct list on the scanners, please Execute following steps:

  • Validate the Ad-Hoc Replenishment Priority field for all Items, by re-entering the value again or using a configuration package with validation.

PBI 238743 - Fix - AOW - Bin Code on Submodule Template should be leading over personal bin for movement

What

Fix - AOW - Bin Code on Submodule Template should be leading over personal bin for movement.

Why

When using multiple bins according to the different submodules in the Ad Hoc Movement, it needs to be possible to use different bins, they need to be leading over the personal bin for movement. This issue is fixed, the correct bin is used in the process.

PBI 236708 - Fix - AOW - No License Plate Type in the Detailed Warehouse Entries nor on the License Plate when posting a receipt from the OWM Activities (DK2913)

What

Fix - AOW - No License Plate Type in the Detailed Warehouse Entries nor on the License Plate when posting a receipt from the OWM Activities.

Why

As a Warehouse Employee, I want the License Plate types to be correct on the License Plates, so I can correctly pick and report. This issue is fixed.

PBI 236374 - Fix - AOWM - Include Dock & Route & Date in Shipment Loading List

What

Fix - AOWM - Include Dock & Route & Date in Shipment Loading List.

Why

As a warehouse employee, I want to have more information than only the Shipment No. in the Shipment Load List, so I can find the correct Shipment to load.

How

Setup in Business Central

  1. Select the Search icon , enter Locations and then choose the related link.
  2. Select the location for which you want to set the validations to the default validations.
  3. Choose Configure OWM in the Ribbon. The OWM Configuration page opens.
  4. Choose Modules on Scanner in the Ribbon. The Modules on scanner list opens.
  5. Choose the Shipment Load List Module. The Module Settings card opens.
  6. Choose the Header Fields action. The Header Fields list opens.
  7. Fill in Lines according to the fields to display in the header. Hover over a field to read a short description.
  • When leaving the Text Format field Blank, the standard format is used to display according to the field type.
  • When adding a text format (Example: <Day,2>/<Month,2>) in the Text Format field, this format is used to display according to the field type. For more information about different formats: Formatting Values, Dates, and Time.

PBI 241506 - Fix - AOW- Pick - Not possible to pick Full Pallets scanning LPN

What

Fix - AOW- Pick - Not possible to pick Full Pallets scanning LPN.

Why

When scanning an LPN (SSCC) in a pick, nothing happens. This issue is fixed.

PBI 240722 - Fix - AOW - Ad hoc Movement - Error Message when multiple LPN on MoveBin and using LPN to place to destination bin

What

Fix - AOW - Ad hoc Movement - Error Message when multiple LPN on MoveBin and using LPN to place to destination bin.

Why

When using an LPN to place one of many LPN’s in the Ad Hoc Movement, an incorrect error could appear. This issue is fixed.

PBI 241569 - Fix - AOW - Correct the default Warehouse Receipt Validations

What

Fix - AOW - Correct the default Warehouse Receipt Validations.

Why

As a Warehouse Manager, I want to easily add the standard validations to a module, so I can easily configure the correct validations within my processes.

How

The validations Validate the quantity and Remaining Qty are added to the Create Default Validations action for the Module Warehouse Receipt.

PBI 241595 - Fix - AOW - Mix Pallet - Upon creation the Quantity Inbound Restriction should be Not Enabled

What

Fix - AOW - Mix Pallet - Upon creation the Quantity Inbound Restriction should be Not Enabled.

Why

When having a mixed License Plate in an inbound process, with multiple Lot Nos and or multiple items and Quantity Inbound Restriction Setup (Default), Multiple Lot Nos or Single Lot No, the license plate is probably not allowed to be received. To avoid this issue, all mixed License Plates need to get the Quantity Inbound Restriction Not enabled upon creation. This issue is fixed.

PBI 240255 - Fix - AOW - Ad Hoc Replenishment - Item Description

What

Fix - AOW - Ad Hoc Replenishment - Item Description.

Why

As a warehouse employee, I want to have more item information on the Ad Hoc Movement and Bin Replenishment lines, so I can easily identify what to take or place.

How

The item description is added to the item line, behind the:

  • From bin in the Take Modus of the Ad Hoc Bin Replenishment
  • License Plate No. in the Place Modus of the Ad Hoc Bin Replenishment
  • License Plate No. in the Take and Place Modus of the Ad Hoc Movement

PBI 242047 - Fix - AOW - Returnable Items need to be updated when loaded multiple times

What

Fix - AOW - Returnable Items need to be updated when loaded multiple times.

Why

As a warehouse manager, I want the automatic update from the scanner to the Purchase or Purchase Return Order to be correct, without double entries, because the warehouse employee with the scanner cannot check these orders, so the orders will updated from correctly from the scanner.


Only the automatic update from the scanner will remove and add the lines upon completing. The Get Returnable items action on the order in Business Central will not remove any lines, only add lines.

How

When the field Returnable items in the fastTab On Completion, Post.. in the OWM Configuration card, is enabled, upon completing the document on the scanner, the lines will be correctly updated in the order in Business Central.

PBI 242262 - Fix - AOW - Entering 0 when handling damaged or lost goods does not work

What

Fix - AOW - Entering 0 when handling damaged or lost goods does not work.

Why

As a Warehouse Employee, I want to be able to (automatically) handle Lost or damaged item quantities I found on the pick bin, so my inventory stays correct and we can cope with lost or damaged goods.

When having no inventory in the bin and entering 0 as quantity to confirm, the scanner went in a loop.

How

This issue is solved, please check, and if necessary, adjust your setup.

Setup to check and adjust Setup Additional Fields per Module.